Product categories

1m3 EXPLOSION CHAMBERS FOR GAS AND DUSTS （CA1M3）

Two sizes of explosion chambers are mandated by international standards for dust explosion testing– 1 m3 (our CA 1M3) and 20 l (our CA 20L). For gas and vapor samples which require a volume larger than 5 l the CA 20L is recommended. Testing methods ... [Details]

20L EXPLOSION CHAMBERS FOR GAS AND DUSTS （CA20L）

Explosion chambers are used for the measurement of the basic explosion characteristic of flammable dusts, gases and vapors. The characteristics measured are the maximum explosion pressure, the maximum rate of pressure rise, the lower and upper explosi... [Details]

MINIMUM IGNITION ENERGY OF DUST DISPERSIONS（MIE-D1.2)

The Minimum Ignition Energy (MIE) of a combustible substance is the lowest value of the electrical energy stored in a capacitor which upon discharge is just sufficient to ignite a fuel/air mixture at atmospheric pressure and room temperature. The MIE ... [Details]

MINIMUM IGNITION TEMPERATURE TESTER （MIT 1000）

The MIT 1000 (Minimum Ignition Temperature Tester) is used for the determination of the minimum temperature of a hot surface which leads to the degradation or the ignition of suspended dust particles.... [Details]

DUST LAYER IGNITION TEMPERATURE TESTER （LIT 400）

The LIT 400 (Dust Layer Ignition Temperature Tester) is intended for the determination of the minimum temperature of a hot surface leading to the degradation or ignition of dust layers of a defined thickness.... [Details]

  • Home
  • 1
  • 2
  • Next
  • Last
  • Total 2Page6Records

    •